Home/ Products / Control Valve /

50D01 Single seat regulating valve
2016-08-27

The 810D Series cage single-seat control valve adopts the top guided unbalanced structure, featured by high strength, heavy load, S type flow channel, low pressure drop loss, high flow coefficient, wide adjustable range, high flow characteristic precision, etc. Featured by tight shut-off, this kind of control valve is suitable for applications with relatively low differential pressure. It is suitable for controlling medium flow or pressure.

The cage adopts the press-in type seat design, which solves the problems of difficult disassembly and high leakage of the traditional thread screw-in type seat and prolongs the service life. The flow to open design is adopted, and the medium flow direction tends to the opening direction of the valve with good controllability of small opening and low flow characteristic distortion. Special cages with noise reduction and anti-cavitation functions can be offered according to the requirements in different service conditions.

Design features

Sleeve guide type
Balanced inner part structure
Balance ring structure (room temperature)
Metal seal ring structure (high temperature)
Good sealing performance, allowing large pressure difference

Technical parameter

Size: DN15~DN400 (1/2"~16")
Pressure: PN1.6-6.3 Mpa (150-300 lb)
Temperature: - 196 +550 (optional)
Material: WCB, 304, 316, 316L, 310S, 2507
Leakage grade: ASME B16.104 V
Implementation criteria: IEC 60534
Cover Type: Standard Type, Heat Dissipation Type, Low Temperature Type, Bellows Type
Connection Form: Flange, Welding, Thread (1")
Actuator: pneumatic actuator, electric actuator

Products

Control Valve Switch Valve Ball Valve Butterfly Valve Plastic Valve Industrial Valve Actuator Accessories

50D01 Single seat regulating valve2016-08-27

50D01 Single seat regulating valve
2016-08-27